ICP DAS USA DN-3000 ユーザーズマニュアル

 

 

 

Use the LEFT/RIGHT arrow keys to highlight the top “OPTIONS” heading and press the ENTER key.  
This will open the OPTIONS” menu.   From within the “OPTIONS” menu you can change the directory 
where project files are stored, select the PC communications port to use, and set up your printer.  
 
Any changes you make will only be effective while you are operating within this software.  When you 
close the configuration software, all settings for the project directory, communications port and will 
return to the default, unless you save the new options to Disk.

 

 
 

 
 

All saved project files will be stored in the selected “PROJECT DIRECTORY”.  Changing the directory 
setting is not usually required unless you wish to group “like” project types in one directory and other 
“like” project types in another directory.

 

 

ADDING A DIRECTORY 
Before you save your project file, use the UP/DOWN arrow keys to move the highlight bar to the “Set 
Directory” sub-heading, press the ENTER key and a directory selection  screen (see next page) will 
appear. 

 

The computer’s cursor will automatically appear at the “Directory Name.”  Type in your new directory 
path and press the ENTER key.  A small window will appear with the following message, “Directory 
does not exist, Make the directory?”  Pressing the ENTER key creates the new directory and returns you 
to the “OPTIONS” menu.