Cabletron Systems 2000 ユーザーズマニュアル
Advanced Alarm Configuration
3-21
Alarm Configuration
13. Click the Apply button to set your changes. If you have made any errors in
configuring alarm parameters (using an invalid value in any field, leaving a
field blank, or selecting an alarm variable which is not resident on the device),
an error window with the appropriate message will appear. Correct the noted
problem(s), and click the Apply button again.
field blank, or selecting an alarm variable which is not resident on the device),
an error window with the appropriate message will appear. Correct the noted
problem(s), and click the Apply button again.
Note that the window remains open so that you may conÞgure additional new
alarms or modify existing ones; remember, you can double-click on any alarm in
the Alarms Watch list in the main Alarm/Event window to display its parameters
in the Create/Edit Alarm window. When you have Þnished conÞguring your
alarms, click on the Cancel button to close the window.
alarms or modify existing ones; remember, you can double-click on any alarm in
the Alarms Watch list in the main Alarm/Event window to display its parameters
in the Create/Edit Alarm window. When you have Þnished conÞguring your
alarms, click on the Cancel button to close the window.
Creating and Editing an Event
) Ñ like the Create/Edit
Alarms window Ñ allows you to both create new events and edit existing ones.
When you click on the Create/Edit button in the Events Watch list, the
Create/Edit Events window will display the parameters of the event which is
currently highlighted in the list. (If no events have yet been conÞgured, a set of
default parameters will be displayed.) All of these parameters are editable: to
change an existing event, edit any parameter except the Index value; to create an
entirely new event, simply assign a new Index number. The ability to assign index
numbers allows you to quickly and easily create a number of similar events
without having to close, then re-open the window or re-assign every parameter.
When you click on the Create/Edit button in the Events Watch list, the
Create/Edit Events window will display the parameters of the event which is
currently highlighted in the list. (If no events have yet been conÞgured, a set of
default parameters will be displayed.) All of these parameters are editable: to
change an existing event, edit any parameter except the Index value; to create an
entirely new event, simply assign a new Index number. The ability to assign index
numbers allows you to quickly and easily create a number of similar events
without having to close, then re-open the window or re-assign every parameter.
Note, too, that the main Alarm/Event window remains active while the
Create/Edit Event window is open; to edit a different event (or use its settings as
the basis of a new event), simply double-click on the event you want to use in the
main Events Watch list, and the Create/Edit Event window will update
accordingly.
Create/Edit Event window is open; to edit a different event (or use its settings as
the basis of a new event), simply double-click on the event you want to use in the
main Events Watch list, and the Create/Edit Event window will update
accordingly.
To conÞgure an event:
1.
If you wish to modify an existing event or create a new event based on the
parameters of an existing one, be sure the event of interest is highlighted in
the Events Watch list, then click on the Create/Edit button at the top of the
Events Watch portion of the RMON Advanced Alarm/Event List. The
Create/Edit Events window,
parameters of an existing one, be sure the event of interest is highlighted in
the Events Watch list, then click on the Create/Edit button at the top of the
Events Watch portion of the RMON Advanced Alarm/Event List. The
Create/Edit Events window,
If you wish to create an entirely new event, it doesn’t matter which existing
event (if any) is highlighted when you open the Create/Edit Events window;
although the window will, by default, display the parameters of whichever
event is currently selected, all parameters are editable and can be configured
as desired.
event (if any) is highlighted when you open the Create/Edit Events window;
although the window will, by default, display the parameters of whichever
event is currently selected, all parameters are editable and can be configured
as desired.
TIP
If the Create/Edit Actions window is also open, it too will update to display the actions
associated with the event currently selected in the main Alarm/Event window. See
associated with the event currently selected in the main Alarm/Event window. See
, for more information on the actions feature.