Cabletron Systems 42 ユーザーズマニュアル

Page 3-3

Attach the strain relief bracket to the front of the STH as follows:

1.

Locate the strain relief bracket and four 8-32 x 3/8" screws from the 
STH-ACCY-KIT package.

2.

Carefully turn the STH upside down.

3.

Attach the strain relief bracket to the bottom of the STH as shown in 
Figure 3-2.

Figure 3-2. Attaching the Strain Relief

Perform these steps to install the STH in a 19-inch rack:

1.

Remove the four cover screws (two from each side) located along the 
front edges of each side of the STH.

2.

Using the four cover screws removed in step 1, attach the rack 
mounting brackets to each side of the STH as shown in Figure 3-3.

3.

With the mounting brackets installed, position the STH between the 
vertical frame members of the 19-inch rack and fasten it securely with 
the mounting screws as shown in Figure 3-4.

HubSTACK

STH-24

16Mb/s

PWR

STACK

SPEED

4M

16M

24X     23X     22X     21X     20X    19X

18X     17X     16X     15X     14X    13X

12X     1 1X     10X       9X       8X      7X

6X       5X       4X        3X        2X       1X