Cabletron Systems 2H22 ユーザーズマニュアル

[13 - 24] (Navigation Key)

When the Switch Configuration screen displays, the current screen 
settings are displayed for the first 12 ports. This field is used to step to the 
next screen for the same type of information for the next twelve ports, if 
available. (The number of ports available is dependent on the 
SmartSwitch model.) To navigate to the next screen, highlight the 

 

field and press ENTER. The user can change the field settings while in 
any of the selected screens.

To reset the peak level of the broadcast traffic, proceed as follows:

Use the arrow keys to highlight the Reset Peak field for the selected 
port.

Press the SPACE bar to select YES or NO.

Use the arrow keys to highlight the SAVE command at the bottom of 
the screen.

Press ENTER. The message “SAVED OK” displays and the Time 
Since Peak field is also reset.

The Repeater Configuration Menu screen and its subordinate security 
screens are only displayed when using the repeater device 2E43-51, 
2E43-51R, 2H23-50R, or 2H33-37R. The screens that will display 
depend on the repeater device. 

In the 2E43-51and 2E43-51R devices, the screens are the Repeater Level 
Security Configuration and Port Level Security Configuration screens. 

In the 2H23-50R and 2H33-37R devices, the screens are the Repeater 
Configuration Menu screen and its two subordinate screens, Repeater 
Level Security Configuration and Port Level Security Configuration 
screens.

For a description of the screens associated with the 2E43-51 and 
2E43-51R devices, refer to 

; for the 2H23-50R and 2H33-37R 

devices, refer to 

. The screens enable the user to configure 

operations and security at the connector and port level.