Cabletron Systems 6E132-25 ユーザーズマニュアル

Use the LEFT-ARROW key to move back to the Advertised Ability 
selection and use the SPACE bar to select the next mode to enable or 
disable. 

Use the RIGHT-ARROW key to move across to the 
Enabled/Disabled field to the right of the selection. 

Use the SPACE bar to select Enabled or Disabled. Press ENTER. 
Continue this process until you have completed enabling or disabling 
the advertised modes.

Use the arrow keys to highlight the SAVE command. Press ENTER. 
The message “SAVED OK” displays and Local Management saves 
the changes to memory.

The Flash Download screen, shown in 

, allows the user to 

clear the information stored in the 6E12X-26 and 6E13X-25 FLASH 
memory and download a new image file from a TFTP server. 

Before downloading a new image to the module, load the image onto the 
network TFTP server.

Access the Flash Download screen from the Module Specific 
Configuration screen by using the arrow keys to highlight the FLASH 
DOWNLOAD menu item and pressing ENTER. The Flash Download 
screen displays.

The user may also force a download by changing the position 
of Switch 6 located inside the module. Refer to 

, for details.

For information on how to set up a workstation as a TFTP 
server, refer to the specific workstation documentation.