Kingston Technology KNE12TX/RS ユーザーズマニュアル

10 Hardware 

Installation 

Kingston Technology Company 

KNE24TX/RS User’s Guide - Rev. A01 

•  KNE100TX/RSC  for SC connectors.  

 
The Fast EtheRx hubs use stacking ports located on the rear panel to stack up 
to six hubs in any combination of 8-Port, 12-Port, or 24-Port models. Follow 
the directions below to stack up to six hubs together: 

1.  Locate the 50-pin shielded stacking cable included with your 

package contents. 

2.  Plug one end of the cable into the port labeled, “Out” on the first 

hub. 

3.  Plug the other end of the cable into the “In” port on the second hub. 
4.  Connect the AC power cord to each hub, then flip the power switch 

to turn on power to the unit. 

5.  Repeat the process to stack additional hubs up to a maximum of six 

(6) hubs. 

Figure 3 below illustrates the configuration for stacking six of the 12-port 
model hubs, expanding the total number of UTP port connections from 12 to 
72 UTP ports, while still being recognized as one single repeater unit on the 
network. A maximum of six (6) Fast EtheRx hubs can be stacked in any 
combination of 8-, 12-, and 24-port models.