Philips SBC SP 370 ユーザーズマニュアル

Although the unit code on the Power switch can be set from 1
to 16, the remote control can only operate Power switches with
unit code set from 1 to 8.

• To operate Power switches with unit code 1-4, the toggle switch on

the remote control should be set to the left (1-4).

– The first 4 buttons on the remote control correspond with unit code

1 to 4 respectively. 

– If the toggle switch on the remote control is set to the right (5-8),

the first 4 buttons correspond with unit code 5 to 8 respectively.

Your appliance must be connected to the Power switch before you can
control it with the remote control 

(fig. 2).

• Select the appliance (e.g. a lamp) you want to control and plug it

into the Power switch 

(fig. 2).

• Please check the power consumption of the selected appliance. The

Power switch can control appliances with a maximum power rating
of 1000 Watts!

• If the selected appliance has its own ON/OFF switch, make sure it

is switched on.

6