Patton electronic 1211E ユーザーズマニュアル
Overview
13
CopperLink 1211E/1212E User Manual
1 • General information
Overview
Thank you for purchasing this Patton Electronics product. This product has been thoroughly inspected and
tested and is warranted for one year for parts and labor. If any questions or problems arise during installation or
use of this product, contact Patton Electronics Technical Support at +(301) 975-1007.
tested and is warranted for one year for parts and labor. If any questions or problems arise during installation or
use of this product, contact Patton Electronics Technical Support at +(301) 975-1007.
Features
•
Variable rate CopperLink Ethernet extender - Easy to configure
•
Auto-MDIX Ethernet
•
Configurable 10/100, Full/Half, and Auto-Negotiating Ethernet
•
Extends up to 1 or 2 10/100Base-TX Ethernet beyond 328-foot (100-meter) limitation over a single
twisted-pair, Cat 5e/6/7
twisted-pair, Cat 5e/6/7
•
Variable line rate settings via DIP switch
•
Transparent operation
•
LED indicators for Power, Line, Local, Remote, Ethernet 0 and 1 (Eth 0 and Eth 1), and Ethernet Link/
Activity
Activity
•
-40 to 85°C operating temperature; optional conformal coating for protection against condensing humidity
and corrosion.
and corrosion.
Description
Patton Electronics CL1212E Ethernet extenders provide high-speed LAN connections between peered Ether-
net LANs, remote PCs, or any other network-enabled 10/100Base-T device.
net LANs, remote PCs, or any other network-enabled 10/100Base-T device.
Operating in pairs, one CL1212E is configured as the (L) Local unit located at one end of the LAN extension
and the other CL1212E is configured as the (R) Remote unit at the other end. The CL1212E is configured as
an L or R via the switch on the bottom of the unit. These units can automatically forward LAN broadcasts,
multicasts, and frames across a 2-wire voice-grade twisted-pair. The data is passed transparently (unmodified)
through the CL1212E. The CL1212Es automatically add and delete MAC addresses, only passing packets
across the Line link that are meant for the remote peered LAN.
and the other CL1212E is configured as the (R) Remote unit at the other end. The CL1212E is configured as
an L or R via the switch on the bottom of the unit. These units can automatically forward LAN broadcasts,
multicasts, and frames across a 2-wire voice-grade twisted-pair. The data is passed transparently (unmodified)
through the CL1212E. The CL1212Es automatically add and delete MAC addresses, only passing packets
across the Line link that are meant for the remote peered LAN.