Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Philips
  4. SWS3435H/37
  5. ユーザーズマニュアル

Philips SWS3435H/37 ユーザーズマニュアル

ダウンロード
ページ / 12
8
EN
4  Activate the 
SWS3435 
function
1
  Turn on the HDTV, video sources and 
HDMI switcher.
2
  Press POWER/SELECT to select the 
video sources one by one. Ensure all 
video sources work properly. 
Note
Repeat the above procedure if the power 
 
•
supply is interrupted.
For CEC compliant HDTV 
and video sources
Ensure your HDTV and video sources are 
• 
in standby mode. 
Ensure the CEC function of your HDTV 
• 
and video sources are activated.
Tip
For more information, see the user manuals of 
 
•
your HDTV and video sources.
•  One touch play function: 
Switch on your video source.
The HDMI switcher is on and switches 
 
»
to the correct input source.
The HDTV is on and switches to the 
 
»
corresponding input source.
•  Automatic switching:
Switch on a video source.
The HDMI switcher switches to 
 
»
the corresponding input source 
automatically.
Depending on different video sources, 
 
»
the previous selected source device 
changes to  / /standby mode.
•  Standby mode:
Switch off the HDTV.
The HDMI switcher and all video 
 
»
sources go into standby mode. 
For non-CEC compliant 
HDTV and/or video sources
The one touch play feature, automatic switching 
and standby mode are inactivated because of 
the following reasons: 
If the HDTV is not CEC compliant while 
• 
the video sources are CEC compliant, 
the HDTV does not respond to the CEC 
commands sent by the video sources.
If the HDTV is CEC compliant while 
• 
all the video sources are non-CEC 
complaint, the video sources do not 
respond to the CEC commands sent by 
the HDTV.
If the HDTV is CEC compliant while 
• 
not all of the video sources are CEC 
compliant, the non-compliant video 
sources do not respond to the CEC 
commands sent by the HDTV.
Manual operation
You can manipulate the HDMI switcher 
manually if the HDTV and/or video sources 
are non-CEC compliant:
To switch off the HDMI switcher, press 
• 
and hold POWER/SELECT.
To switch on the HDMI switcher, press 
• 
POWER/SELECT again.
To switch between different input 
• 
sources, press POWER/SELECT on the 
HDMI switcher.
The LED indicator corresponding to 
 
»
the channel lights up.