D-Link DES-3250TG ユーザーズマニュアル

The AC power connector is a standard three-pronged connector that supports the power cord. Plug-in the female connector of 
the provided power cord into this socket, and the male side of the cord into a power outlet. Supported input voltages range 
from 100 ~ 240 VAC at 50 ~ 60 Hz. 

Each side panel contains heat vents to help to dissipate heat. 

 

The system fans are used to dissipate heat. The sides of the system also provide heat vents to serve the same purpose. Do not 
block these openings, and leave at least 6 inches of space at the rear and sides of the switch for proper ventilation. Be reminded 
that without proper heat dissipation and air circulation, system components might overheat, which could lead to system failure. 

In addition to the 48 10/100 Mbps ports, the Switch features two Gigabit Ethernet Combo ports. These two ports are 
1000BASE-T copper ports (provided) and Mini-GBIC ports (optional). See the diagram below to view the two Mini-GBIC 
port modules being plugged into the Switch. Please note that although these two front panel modules can be used 
simultaneously, the ports must be different. The GBIC port will always have the highest priority. 

 

The LED indicators of the Switch include Power, Console, and Link/Act. The following shows the LED indicators for the 
Switch along with an explanation of each indicator.