D-Link DES-3250TG ユーザーズマニュアル
D-Link DES-3250TG Standalone Layer 2 Switch
Figure 7- 3. Switch Information (Advanced Settings) window
The following fields can be set:
Parameter
Description
MAC Address Aging
Time <300>
Time <300>
The MAC Address Aging Time specifies the
length of time a learned MAC Address will
remain in the forwarding table without being
accessed (that is, how long a learned MAC
Address is allowed to remain idle). The Aging
Time can be set to any value between 10 and
1,000,000 seconds.
length of time a learned MAC Address will
remain in the forwarding table without being
accessed (that is, how long a learned MAC
Address is allowed to remain idle). The Aging
Time can be set to any value between 10 and
1,000,000 seconds.
IGMP Snooping
<Disabled>
<Disabled>
IGMP Snooping allows the switch to read the
Multicast Group IP address and the
corresponding MAC address from IGMP
packets that pass through the switch. It can be
enabled globally by toggling Disabled to
Enabled.
Multicast Group IP address and the
corresponding MAC address from IGMP
packets that pass through the switch. It can be
enabled globally by toggling Disabled to
Enabled.
GVRP Status
<Disabled>
<Disabled>
To enable GVRP on the switch globally, toggle
Disabled to Enabled.
Disabled to Enabled.
Telnet Status
<Disabled>
<Disabled>
The Switch can be accessed using Telnet.
Toggle Disabled to Enabled.
Toggle Disabled to Enabled.
Web Status <Disabled> To enable the Web status, toggle Disabled to
Enabled.
Link Aggregation
Algorithm <Mac
Source>
Algorithm <Mac
Source>
The Link Aggregation Algorithm can be set to
one of the following: IP Src & Dest, IP
Destination, IP Source, Mac Src & Dest, Mac
Destination or Mac Source
one of the following: IP Src & Dest, IP
Destination, IP Source, Mac Src & Dest, Mac
Destination or Mac Source
34