Q-Logic SANBOX2-8C ユーザーズマニュアル
B – Command Line Interface
Admin Command
B-4
59042-00 A
Admin Command
Opens and closes an Admin session granting Admin authority. The Admin session
provides commands that change the fabric and switch configurations. Only one
Admin session can be open in the fabric at any time. An inactive Admin session
will time out after a period of time which can be changed using the Set Setup
System command. Refer to the
provides commands that change the fabric and switch configurations. Only one
Admin session can be open in the fabric at any time. An inactive Admin session
will time out after a period of time which can be changed using the Set Setup
System command. Refer to the
Authority
Admin
Syntax
admin
start
end
cancel
end
cancel
Keywords
start
Opens the Admin session.
Opens the Admin session.
end
Closes the Admin session.
Closes the Admin session.
cancel
Terminates an Admin session opened by another user. Use this keyword with care
because it terminates the Admin session without warning the other user and
without saving pending changes.
Terminates an Admin session opened by another user. Use this keyword with care
because it terminates the Admin session without warning the other user and
without saving pending changes.
Examples
The following example shows how to open and close an Admin session:
SANbox2 $> admin start
SANbox2 (admin) #>
.
.
.
SANbox2 (admin) #> admin end
SANbox2 #>