Q-Logic SANBOX2-8C ユーザーズマニュアル

B – Command Line Interface

Config Command

59042-00 A

B-7

Manages the Fibre Channel configurations on a switch. For information about 
setting the port and switch configurations, refer to the 

Admin for all keywords except List

activate [config]
backup
cancel
copy [config_source] [config_destination]
delete [config]
edit [config]
list
restore
save [config]

activate [config]
Activates the configuration given by [config]. If you omit the configuration, the 
currently active configuration is used. SANbox2-8c supports up to 10 
configurations (only one can be active at a time).

backup
Creates a file named configdata, which contains the system configuration 
information. This file should be downloaded from the switch using FTP and stored 
in a safe place.

cancel
Terminates the current configuration edit session without saving changes that 
were made.

copy [config_source] [config_destination]
Copies the configuration given by [config_source] to the configuration given by 
[config_destination].

delete [config]
Deletes the specified configuration file where [config] is a file name.

edit [config]
Opens the an edit session for the configuration given by [config]. If you omit the 
configuration name, the currently active configuration is used. SANbox2-8c 
supports up to 10 configurations (only one can be active at a time). 

list
Displays a list of all available configurations. This keyword is available with User 
authority.