Q-Logic SANBOX2-8C ユーザーズマニュアル
B – Command Line Interface
Set Beacon Command
59042-00 A
B-23
Set Beacon Command
Assists in locating a switch by causing all port Logged-In LEDs on the switch to
flash.
flash.
Authority
User
Syntax
set beacon [state]
Keywords
[state]
Enables or disables the flashing of the port Logged-In LEDs according to [state].
Enables or disables the flashing of the port Logged-In LEDs according to [state].
On
Enables the flashing beacon.
Enables the flashing beacon.
Off
Disables the flashing beacon.
Disables the flashing beacon.
Examples
The following examples enables and disables the beacon:
SANbox2 $> set beacon on
Command succeeded.
SANbox2 $> set beacon off
Command succeeded.