Q-Logic 59021-05 ユーザーズマニュアル
4 – Installation
Installing a Switch
4-4
59021-05 A
To mount the switch in a rack, do the following:
1.
Ensure that the19-inch rack meets the following standard specifications:
■
ANSI/EIA RS-230 Standard, entitled Cabinets, Racks, Panels, and
Associated Equipment
Associated Equipment
■
MIL-STD- 189, entitled Racks, Electrical Equipment, 19-Inch and
Associated Panels
Associated Panels
2.
Mount the brackets on the front or rear corners of the chassis as shown in
3.
Place the switch in the rack and secure it with four 10-32 x .625” machine
screws (not supplied).
screws (not supplied).
Figure 4-2. Installing Rack Mount Brackets
4.2.2
Install SFP Transceivers
The switch will support a variety of interconnection media. Refer to
for information about removing and installing SFP
transceivers.