Q-Logic 8C/16 ユーザーズマニュアル

3 – Managing Fabrics

Zoning a Fabric

59022-06 A

3-27

Q

4.

To add ports or devices to the zone, do one of the following:
„

In the zone set tree, select the zone set. In the graphic window, select 
the port to add to the zone. Open the Edit menu and select Add 
Members. 

„

Select a port by port number, Fibre Channel address, or worldwide 
name in the Port/Device tree, and drag it into the zone.

„

Select a port by port number, Fibre Channel address, or worldwide 
name in the Port/Device tree. Right-click the zone and select Add 
Zone Members from the popup menu.

5.

Choose the Apply button to save changes to the zoning database.

Adding a zone member to a zone will affect every zone set in which that zone is a 
member. To add member ports/devices to a zone, do one of the following:

„

Select a port by port number, Fibre Channel address, or worldwide name in 
the Port/Device tree, and drag it into the zone. To select and drag multiple 
ports/devices, press and hold the Control key while dragging.

„

Select one or more ports by port number, Fibre Channel address, or 
worldwide name in the Port/Device tree. Right-click the zone and select Add 
Zone Members from the popup menu.

„

Open the Edit menu or right click on the selected zone and select Create 
Members. Choose the WWN, Domain/Port, or FC address radio button and 
enter the port hex value.

Choose the Apply button to save changes to the zoning database.

Domain ID conflicts can result in automatic reassignment of switch 
domain IDs. These reassignments are not reflected in zones that use 
domain ID/port number pair to define their membership. Be sure to 
reconfigure zones that are affected by a domain ID change.