Ruby Tech GS-5124C プリント

24-Port Unmanaged Gigabit Ethernet Switch

24-Port 10/100/1000 Mbps GbE Switch
Provides two Gigabit Ethernet Modules 

    options: 1000Mbps RJ-45/1000Mbps 
    Fiber SFP (single-mode/multi-mode) for 
    remote uplink

Conforms to IEEE 802.3

    10BASE-T, IEEE 802.3u 100BASE-TX,
    IEEE 802.3ab 1000BASE-T and IEEE 
    802.3x flow control standards

Supports 10/100Mbps auto-detect half/

    full duplex and 1000Mbps at full duplex

Supports TP interface auto MDI/MDI-X

    function for auto TX/RX swap

Supports 802.3x flow control pause 

    packet for full duplex

LEDs to indicate: 10/100/1000Mbps, Link

    /Act. and Power Status

Slim & Compact design
RoHS Compliance

GS-5124C is a cost-effective switch that 
meets all IEEE 802.3/u/x/z Gigabit, Fast 
Ethernet specifications. With 48 Gbps 
switch fabric, the switch improves your
network performance. You can connect to
backbone or make Gigabit to the PC to 
perform high speed transfer. The switch
has a 8K MAC Address Table and provides
a 400K on-chip buffer. It is suitable for 
workgroups or WAN edge application. The
versatile and compact 1RU height design 
of the GS-5124C enables the device to be
rackmounted in a standard 19 inch rack, 
while conserving valuable rack space.
Easy Installation and Configuration
GS-5124C conforms to plug and play for
easy installation and use. With diagnostic
LEDs, network and port status can be 
easily monitoring and trouble-shooting. 
GS-5124C also build in wiring crossover on
all ports allows connection to server or PC
without worrying about cabling.

RUB

TECH

Unmanaged Switch

    IEEE 802.3 10Base-T Ethernet(twisted-pair copper)
    IEEE 802.3u 100Base-TX Ethernet(twisted-pair copper)
    IEEE 802.3ab 1000Base-T Ethernet(twisted-pair copper)
    IEEE 802.3Z 1000Base-T Ethernet(Gigabit Fiber)
    ANSI/IEEE 802.3 Auto-negotiation

MAC Address: 8K
Network Interface: 24 10/100/1000Mbps RJ-45 ports
Flow control:

    IEEE802.3x compliant for full-duplex
    Back pressure flow control for half-duplex

   10BASE-T: UTP Cat. 3, 4, 5 or up 
   100BASE-TX: UTP Cat. 5 or up
   1000BASE-T: UTP Cat. 5 or up

Transmission Mode: 10/100Mbps, full/half-duplex (Auto-sensing)
Transfer Rate: 

   10Mbps: 14880pps (64 Bytes Package)
   100Mbps: 148800pps (64 Bytes Package)
   1000Mbps: 1488000pps (64 Bytes Package)

Buffer Memory: 400KB on chip frame buffer
Switching Method: Store & forward

Global   POWER     Green       Lit when +5V power is coming up
Global   CPU/          Green       Blinks when CPU is activity
               ACT
Port       LINK/          Green       Lit when connection with remote device
1-24       ACT                              is good
                                                    Blinks when any traffic is present
Port       1000/          Green/      Lit Green when TP link on 1000Mbps 
1-24       100Mbps    Amber      speed
                                                    Lit Amber when TP link on 100Mbps 
                                                    speed
                                                    Off when 10Mbps or no link occur

G
i

g

a

b

i

t

 S

w
i

t

c

h

Gigabit Switch