Network Technologies ST-nXm-U ユーザーズマニュアル

 

 

In order to control the switch with the keyboard, Command Mode must be enabled.  To enable Command Mode from the 
keyboard: 

         Press     

 

All the status lights on the keyboard will illuminate to indicate that Command Mode is enabled.  At this point, the Command Mode 
menu will be displayed. 

The Command Mode menu lists all CPUs by name and port number.  Only 8 ports are listed on the screen at a time. To view the 
other portions of the list, scroll using the arrow keys on the keyboard or use the mouse to click on the arrows on the scroll bar in 
the OSD menu.   When the Command Mode main menu is displayed, the first displayed port in the list will be the port the current 
user is connected to, followed by the next seven consecutively numbered ports.  (Alternatively the list may be sorted 
alphabetically- see Maintenance Mode on page 18 to toggle sort method.)    The names of accessible ports are displayed with 
white characters. If Security is activated, the access rights for the user logged-in may not include all ports. Names of restricted 
access ports are displayed in blue. 

 

 

 

 

From left to right, the columns display the following:  

• Port 

Number 

• 

Port Name  

• 

Type of CPU connected (PS2 or SUN)  

• 

Power status of that CPU (ON/OFF)  

• 

User number (1-8) connected to that CPU 

 At the far right, arrows pointing up and down allow for mouse clicking to maneuver up and down through the menu.  While in 
COMMAND Mode, the numbers on the NUM PAD are not active.   If numbers are required while in COMMAND Mode, use the 
numbers on the main key bank. 

When the COMMAND LED is illuminated, the following functions are available with the OSD: 

↑ 

Select previous port on OSD display 

↓ 

Select next port on OSD display 

Increments the menu by 1 page 

Decrements the menu by 1 page 

Enter Edit mode 

Enter Maintenance mode