Fujitsu eLux NG S26361-F2600-L134 ユーザーズマニュアル
製品コード
S26361-F2600-L134
www.
myelux
.com
eLux
®
NG
Build # 27
169
4.8.3 Secure
Shell
This predefined command calls a local client that allows you to connect to a remote Secure
Shell (SSH) server. The software package “SSH Tools“ (ssh) must be installed.
Shell (SSH) server. The software package “SSH Tools“ (ssh) must be installed.
Figure 106: Application definition dialog box for SSH
To configure SSH
From the Configuration tab, click New.
1. The
Application Definition
dialog box appears. Click the Local tab.
• Name: Enter an appropriate name for this application.
• Application: Click SSH.
• Parameter: Enter the user and the remote host, as shown in Figure 106, in the
• Application: Click SSH.
• Parameter: Enter the user and the remote host, as shown in Figure 106, in the
following format: -l <username> <host>. See “User Authorization” below.
• Application Restart: Click to select to immediately reconnect after the user logs
off. When this feature is selected, the application automatically starts when the
Thin Client starts or restarts
Thin Client starts or restarts
• Start automatically: Click this check box to open the session when the terminal
starts.
• Desktop icon Creates a desktop shortcut for this application on the eLux NG
desktop.
2. Click
Finish
.
Password Authorization
SSH server settings determine the type of authorization (password or key) needed to connect.
If you want to connect using a password, the SSH server must be configured for password
authorization.
SSH server settings determine the type of authorization (password or key) needed to connect.
If you want to connect using a password, the SSH server must be configured for password
authorization.