3com 5500G ユーザーズマニュアル
144
C
HAPTER
16: M
ULTICAST
C
ONFIGURATION
G
UIDE
Configuration Procedure
Assume that the IP addresses have been configured and the devices have been
connected correctly.
connected correctly.
1 Configure Switch A.
# Configure the IP address of VLAN-interface 20 as 168.10.1.1, and enable
PIM-DM.
PIM-DM.
<SwitchA> system-view
[SwitchA] multicast routing-enable
[SwitchA] vlan 20
[SwitchA-vlan20]port Ethernet1/0/1
[SwitchA-vlan20] quit
[SwitchA] interface Vlan-interface 20
[SwitchA-Vlan-interface20] ip address 168.10.1.1 255.255.255.0
[SwitchA-Vlan-interface20] pim dm
[SwitchA-Vlan-interface20] quit
# Create VLAN 10.
[SwitchA] vlan 10
[SwitchA-vlan10] quit
# Configure Ethernet 1/0/10 as a Hybrid port, assign it to VLAN 10, and configure
it to send packets of VLAN 10 with the VLAN tag kept.
it to send packets of VLAN 10 with the VLAN tag kept.
[SwitchA] interface Ethernet1/0/10
[SwitchA-Ethernet1/0/10] port link-type hybrid
[SwitchA-Ethernet1/0/10] port hybrid vlan 10 tagged
[SwitchA-Ethernet1/0/10] quit
# Configure the IP address of VLAN-interface 10 as 168.10.2.1, and enable
PIM-DM and IGMP.
PIM-DM and IGMP.
[SwitchA] interface Vlan-interface 10
[SwitchA-Vlan-interface10] ip address 168.10.2.1 255.255.255.0
[SwitchA-Vlan-interface10] igmp enable
[SwitchA-Vlan-interface10] pim dm
2 Configure Switch B.
# Enable IGMP Snooping globally.
<SwitchB> system-view
[SwitchB] igmp-snooping enable
# Create VLAN 2, VLAN 3, and VLAN 10, configure VLAN 10 as a multicast VLAN,
and enable IGMP Snooping in VLAN 10.
and enable IGMP Snooping in VLAN 10.
[SwitchB] vlan 2 to 3
Please wait.... Done.
[SwitchB] vlan 10
[SwitchB-vlan10] service-type multicast
Switch 4210
Release V03.01.00
All versions
Product series
Software version
Hardware version