3com 5500G ユーザーズマニュアル
DHCP Client Configuration Guide
205
#
vlan 2
#
vlan 3
#
interface Vlan-interface2
ip address 10.1.1.1 255.255.255.0
#
interface Vlan-interface3
ip address 10.1.2.1 255.255.255.0
#
interface Ethernet1/0/1
port access vlan 2
#
interface Ethernet1/0/2
port access vlan 3
#
Precautions
Before configuring DHCP accounting, make sure that:
■
The DHCP server is configured (such as the address pool, lease time and other
configuration parameters).
configuration parameters).
■
The DHCP client is enabled.
■
Routes are reachable.
DHCP Client
Configuration Guide
Configuration Guide
With the DHCP client enabled on an interface, the interface will use DHCP to
obtain configuration parameters such as an IP address from the DHCP server.
obtain configuration parameters such as an IP address from the DHCP server.
Network Diagram
Networking and
Configuration
Requirements
Configure VLAN-interface 1 on Switch B to obtain an IP address through DHCP.
Applicable Products
Configuration Procedure
# Create VLAN-interface 1 on Switch B and enter its view.
[SwitchB] interface Vlan-interface 1
# Configure VLAN-interface 1 to obtain an IP address through DHCP.
[SwitchB-Vlan-interface1] ip address dhcp-alloc
[SwitchB-Vlan-interface1] quit
Product series
Software version Hardware version
Switch 5500
Release V03.02.04
All versions
Switch 5500G
Release V03.02.04
All versions
Switch 4500
Release V03.03.00
All versions
Switch 4210
Release V03.01.00
All versions