3com 5500G ユーザーズマニュアル

1 Configurations on the management device

#

interface Vlan-interface2

ip address 163.172.55.1 255.255.255.0

#

ntdp hop 2

ntdp timer port-delay 15

ntdp timer hop-delay 150

ntdp timer 3

#

ndp timer hello 70

ndp timer aging 200

#

cluster

ip-pool 172.16.0.1 255.255.255.248

build aaa

holdtime 100

nm-interface Vlan-interface2

ftp-server 63.172.55.1

tftp-server 63.172.55.1

logging-host 69.172.55.4

snmp-host 69.172.55.4

# 

■

After the above configuration, you can execute the cluster switch-to { 
member-number | mac-address H-H-H } command on the management device 
to switch to the view of a member device to maintain and manage the member 
device, and then use the cluster switch-to administrator command to return 
to the view of the management device.

■

On the management device, you can use the reboot member { 
member-number | mac-address H-H-H } [ eraseflash ] command to reboot a 
member device. For detailed information about these operations, refer to 
“Complete Configuration” on page 251.

■

After the above configuration, you can receive logs and SNMP trap messages 
of all the cluster members on the NMS.

■

The switches cannot be used as TFTP servers.

■

It is recommended not to transmit data packets in the management VLAN.

The Switch 5500 supports the network management interface configuration for a 
cluster. Through the network management interface of a cluster, you can manage 
the member devices of the cluster from outside of the cluster.