3com 5500G ユーザーズマニュアル
Configuring the Switch to Act as the SSH Client and Use Password Authentication
291
[3Com-ui-vty0-4] protocol inbound ssh
[3Com-ui-vty0-4] quit
# Create local user client001, and set the authentication password to abc,
protocol type to SSH, and command privilege level to 3 for the client.
protocol type to SSH, and command privilege level to 3 for the client.
[3Com] local-user client001
[3Com-luser-client001] password simple abc
[3Com-luser-client001] service-type ssh level 3
[3Com-luser-client001] quit
# Specify the authentication method of user client001 as password.
[3Com] ssh user client001 authentication-type password
■
Configure Switch A
# Create a VLAN interface on the switch and assign an IP address for it. This
address will serve as the SSH client’s address for SSH connection.
address will serve as the SSH client’s address for SSH connection.
<3Com> system-view
[3Com] interface vlan-interface 1
[3Com-Vlan-interface1] ip address 10.165.87.137 255.255.255.0
[3Com-Vlan-interface1] quit
# Establish a connection to the server 10.165.87.136.
[3Com] ssh2 10.165.87.136
Username: client001
Trying 10.165.87.136 ...
Press CTRL+K to abort
Connected to 10.165.87.136 ...
The Server is not authenticated. Do you continue to access it?(Y/N):y
Do you want to save the server’s public key?(Y/N):n
Enter password:
**********************************************************************
*
Copyright(c) 2004-2007 Hangzhou 3Com Tech. Co., Ltd. All rights reserved.*
*
Without the owner’s prior written consent,
*
*
no decompiling or reverse-switch fabricering shall be allowed.
*
**********************************************************************
<3Com>
Complete Configuration
■
Configure Switch B
#
local-user client001
password simple abc
service-type ssh
level 3
#
interface Vlan-interface1
ip address 10.165.87.136 255.255.255.0
#
ssh user client001 authentication-type password
ssh user client001 service-type stelnet
#
user-interface vty 0 4