3com 5500G ユーザーズマニュアル

On the Windows operating system, software settings vary with log host software.

Figure 108   Network diagram for outputting log information to the console

 

Log information with a severity higher than informational will be output to the 
console, and the information source modules are ARP and IP.

# Enable the information center.

<3Com> system-view

[3Com] info-center enable 

# By default, the system outputs information of all modules to the console. 
Therefore, to obtain the system information of the ARP and IP modules, you need 
to disable the output of information of all modules to the console.

[3Com] undo info-center source default channel console 

# Set the severity to informational, and the information source modules to ARP 
and IP.

[3Com] info-center console channel console

[3Com] info-center source arp channel console log level informationa

l debug state off trap state off

[3Com] info-center source ip channel console log level informational

debug state off trap state off 

# Enable terminal display.

<3Com> terminal monitor

<3Com> terminal logging 

#

info-center source ARP channel 0 trap state off

PC

Switch

Console

Switch 5500

Release V03.02.04 

All versions

Switch 5500G

Release V03.02.04 

All versions

Switch 4500

Release V03.03.00 

All versions

Switch 4210

Release V03.01.00 

All versions