3com 5500G ユーザーズマニュアル
68
C
HAPTER
13: A
UTO
D
ETECT
C
ONFIGURATION
G
UIDE
■
Create detected group 9 on Switch C; detect the reachability of IP address
10.1.1.3, with the next hop being 192.168.1.1/24, and the detecting number
being 1.
10.1.1.3, with the next hop being 192.168.1.1/24, and the detecting number
being 1.
Applicable Products
Configuration Procedure
Configure IP addresses for the interfaces according to Figure 19. The configuration
procedure is omitted here.
procedure is omitted here.
■
Configure Switch A
# Enter system view.
<SwitchA> system-view
# Create detected group 8.
[SwitchA] detect-group 8
# Detect the reachability of 10.1.1.4, with the next hop being 192.168.1.2, and
the detecting number being 1.
the detecting number being 1.
[SwitchA-detect-group-8] detect-list 1 ip address 10.1.1.4 nexthop 1
92.168.1.2
[SwitchA-detect-group-8] quit
# Configure a static route to Switch C.
[SwitchA] ip route-static 10.1.1.4 24 192.168.1.2
# Configure the master static route, which is valid when the detected group is
reachable.
reachable.
[SwitchA] ip route-static 10.1.3.1 24 192.168.1.2 detect-group 8
# Configure the backup static route, and set its preference to 80. The backup
route is valid when the detected group is unreachable.
route is valid when the detected group is unreachable.
[SwitchA] ip route-static 10.1.3.1 24 192.168.3.2 preference 80
■
Configure Switch C
# Enter system view.
<SwitchC> system-view
# Create detected group 9.
[SwitchC] detect-group 9
Product series
Software version
Hardware version
Switch 5500
Release V03.02.04
All versions
Switch 5500G
Release V03.02.04
All versions
Switch 4500
Release V03.03.00
All versions