3com S330 ユーザーズマニュアル
5
P
ATH
B
UILDER
S330 D
IAGNOSTICS
AND
P
ERFORMANCE
S
TATISTICS
This chapter tells you how to access and manage SuperStack II PathBuilder S330
and S310 WAN access switch (PathBuilder S330/S310) system alarms, how to use
available loopbacks, and how to view performance statistics for the PathBuilder
S330/S310. It contains the following sections:
and S310 WAN access switch (PathBuilder S330/S310) system alarms, how to use
available loopbacks, and how to view performance statistics for the PathBuilder
S330/S310. It contains the following sections:
n
n
n
n
Managing System
Alarms
Alarms
The PathBuilder S330 detects certain events and reports corresponding alarms and
traps to the NMS station(s). These events are categorized as major alarms, minor
alarms, and information. When an alarm occurs, an alarm indicator is displayed on
the current menu or display, as described under “Alarm Indicator” in Chapter 3.
traps to the NMS station(s). These events are categorized as major alarms, minor
alarms, and information. When an alarm occurs, an alarm indicator is displayed on
the current menu or display, as described under “Alarm Indicator” in Chapter 3.
Viewing and Clearing
Current Alarms
To view a list of current alarms, follow these steps:
1 From the Main menu, select [3] Fault Management to display the Fault
Figure 133 Fault Management Menu