3com S330 ユーザーズマニュアル

The Equipment List displays the following information for each installed module:

Slot—Slot number. This is a reference number for the ports on the motherboard. 
This number corresponds to the number on the List Card menu. (See Figure 51, 
later in this chapter.)

Card type—The card type: Shelf, MCPU, CTX, T1/E1 UNI (4), OC3/STM-1 UNI, 
SIM, Ethernet, or CBR T-1DSX, or CBR E1.

PART#-idprom—The part number as programmed at the factory.

PART#-oem—The part number for OEM customers.

Serial #—The serial number for the card. This is the same for all ports on the 
motherboard. The optional CBR module has a separate serial number.

Rev #—The revision number for the card. This is the same for all ports on the 
motherboard, as they come already installed in the unit. The optional CBR module 
has a separate revision number.

Select [2] Configuration Management from the Main menu to display the 
Configuration Management menu, shown in Figure 50. Use this menu to access 
submenus and screens that allow you to:

n

Manage cards—View shelf configuration information and configure the 
PathBuilder S330/S310 CPU, CTX, ports, CBR module, and Voice Compression 
module.

n

Manage circuits—List, add, modify, and delete virtual circuits.

n

Manage the bridge—Set the bridge aging timer and configure the bridge.

n

Manage the video dial feature—View the call routing table, manually start 
and end video dial-up sessions.

Figure 50   Configuration Management Menu