3com WX2200 ユーザーズマニュアル

Guest access is access for visitors at your location and is typically clear (no 
encryption).

This section contains the following information about how to configure 
Guest access services:

„

„

„

Table 11 contains the tasks you must perform to configure Guest access 
services. The “Step Summary” provides the configurable options you 
should set. The table contains references to the section “Example: 
Configure Employee Access” on page 55. The references are provided in 
case you want to refer back to detailed steps. However, be sure to use 
the configurable options for Guest access services set forth in the “Step 
Summary” on page 71. Also, you can optionally configure mobility 
profiles for your Guest access services to limit access based on criteria, 
such as RF coverage area or time of day.

Table 11 contains the tasks you need to perform to create Guest access services. 
For a summary of configurable items, see “Step Summary” on page 71.

Table 11   Creating a Service for Guest Access

1 Tool bar option: select 

Configuration.

2 Organizer panel: expand 

the WX switch.

3 Expand Wireless.

4 Click Radio Profiles.

5 Select Radio Profile in the 

Task List.

From the Create Radio Profile 
wizard:

„

Radio profile name: enter a name

After you create the service 
profile, you can map it to the 
radio profile.

After you install the MAPs, you 
can map their radios to the radio 
profile.

Note: The examples in this chapter 
configure the radio profile first. 
However, you also can configure 
the radio profile later as part of 
service profile configuration.