3com WX2200 ユーザーズマニュアル

The following list summarizes the fields selected or configuration items 
entered in the example that follows to configure VoWIP access:

1 Create a radio profile.

„

From the Radio Profile wizard, enter RadioProfileVoic as the Name of 
the radio profile.

„

Click Finish. 

„

Select the radio profile and click Properties.

„

Select the 802.11 Attributes and change the DTIM Period to 3.

„

Click OK. 

2 Create a Voice service profile.

„

From the Voice Service Profile wizard, click Next and enter 
Voice-WMM, Voice-SVP, Voice-Avaya, or Voice-Vocera

as the Name 

of the service profile and WMM, SVP, Avaya, or Vocera as the SSID.

„

Select the Vendor (SpectraLink, Avaya, Vocera, or Other).

„

Click Next. Select the access type. (The examples in this section use 
Open Access.)

„

Click Next. Select the data encryption method. (The examples in this 
section use WPA and disable Static WEP.)

„

Click Next. Leave TKIP enabled and click Next.

„

Click Next. Type a passphrase from 8 to 63 characters long in the 
Pre-shared Key box and click Generate.

„

Click Next. Type voice-vlan as the VLAN name to place voice users in. 

„

Click Next. (If the device supports WMM, select WMM.)

„

Click Next. Select RadioProfileVoic in the Radio Profiles list.

„

Click Finish.

3 Set up a VLAN on the WX switches.

„

From the Create VLAN wizard, enter voice-vlan as the VLAN name. 

„

Click Next. Select the VLAN ports. Click Move to use them exclusively 
in this VLAN. 

„

Click Finish.

„

Select the VLAN and click Properties.

„

Select IGMP and deselect Enabled to disable IGMP snooping.