3com 4200G ユーザーズマニュアル
128
C
HAPTER
15: R
OUTING
C
ONFIGURATION
G
UIDE
#
router id 1.1.1.1
#
vlan 1
#
vlan 2
#
interface Vlan-interface1
ip address 196.1.1.2 255.255.255.0
#
interface Vlan-interface2
ip address 197.1.1.2 255.255.255.0
#
ospf 1
area 0.0.0.0
network 196.1.1.0 0.0.0.255
area 0.0.0.1
network 197.1.1.0 0.0.0.255
vlink-peer 2.2.2.2
#
■
Perform the following configuration on Switch B.
#
router id 2.2.2.2
#
vlan 1
#
vlan 2
#
interface Vlan-interface1
ip address 152.1.1.1 255.255.255.0
#
interface Vlan-interface2
ip address 197.1.1.1 255.255.255.0
#
ospf 1
area 0.0.0.1
network 197.1.1.0 0.0.0.255
vlink-peer 1.1.1.1
area 0.0.0.2
network 152.1.1.0 0.0.0.255
#
Precautions
■
Both ends of a virtual link must be ABRs configured with the vlink-peer
command.
command.
■
A virtual link cannot transit the backbone area.
■
The vlink-peer command needs to be used in the transit area.
Configuring Routing
Policies
Policies
When advertising, redistributing or receiving routing information, a router can
apply some policy to filter the routing information. For example, a router
receives/sends only routing information that matches certain criteria, or a routing
protocol redistributes from other protocols only the routes matching certain
criteria and modifies some attributes of these routes to satisfy its needs.
apply some policy to filter the routing information. For example, a router
receives/sends only routing information that matches certain criteria, or a routing
protocol redistributes from other protocols only the routes matching certain
criteria and modifies some attributes of these routes to satisfy its needs.