3com 4200G ユーザーズマニュアル

C

HAPTER

 23: Q

O

S/Q

O

S P

ROFILE

 C

ONFIGURATION

 G

UIDE

# Enable 802.1x.

[3Com] dot1x

[3Com] dot1x interface Ethernet 1/0/1 

#

dot1x

#

radius scheme system

radius scheme radius1

server-type standard

primary authentication 10.11.1.1

primary accounting 10.11.1.2

secondary authentication 10.11.1.2

secondary accounting 10.11.1.1

key authentication money

key accounting money

user-name-format without-domain

#

domain system

domain test.net

scheme radius-scheme radius1

#

acl number 3000

rule 0 permit IP

#

qos-profile example

traffic-limit inbound ip-group 3000 rule 0 128 exceed drop

#

interface Ethernet1/0/1

dot1x

# 

Note that:

■

A QoS profile can be applied manually or dynamically. You can use the apply 
qos-profile profile-name command to manually apply a QoS profile to a port. 
You can also combine a QoS profile with the 802.1x authentication function to 
provide the pre-defined QoS function for a user or a group of users that have 
passed authentication.

■

Depending on the 802.1x authentication mode, dynamic QoS profile 
application mode can be user-based or port-based. The user-based mode is the 
default mode.

■

If the traffic classification rules of a QoS profile take source information 
(including source MAC, source IP, VLAN) as the match criterion, the QoS profile 
cannot be applied in the user-based mode.

■

Currently, the QoS profile function provides packet filtering, traffic policing, 
and priority marking.

■

The granularity of traffic policing is 64 kbps. If the value you input is in the 
range of N

×64 to (N+1)×64 (N is a natural number), the switch sets the value to 

(N+1)

×64 kbps automatically.