3com 4500 PWR 50-PORT ユーザーズマニュアル
Ethernet Port Configuration Commands
61
number are specified, the information on the specified port will be cleared. After
802.1x is enabled, the port information cannot be reset.
802.1x is enabled, the port information cannot be reset.
Example
To reset statistical information on Ethernet1/0/1, enter the following:
<4500>reset counters interface ethernet1/0/1
<4500>
shutdown
Syntax
shutdown
undo shutdown
View
Ethernet Port View
Parameter
None
Description
Use the
shutdown
command to disable an Ethernet port. Use the
undo shutdown
command to enable an Ethernet port.
By default, the Ethernet port is enabled.
Example
To disable and then enable Ethernet1/0/1, enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]interface ethernet 1/0/1
[4500-Ethernet1/0/1]shutdown
[4500-Ethernet1/0/1]undo shutdown
speed
Syntax
For a 100 Mbps Ethernet port, the parameters for this command are as follows:
speed { 10 | 100 | auto }
For a 1000 Mbps Ethernet port, the parameters for this command are as follows:
speed { 10 | 100 | 1000 | auto }
The undo form of this command is:
undo speed
View
Ethernet Port View
Parameter
10:
Enter to set the port speed to 10 Mbps.
100:
Enter to set the port speed to 100 Mbps.