Enterasys Networks VH-8G-L3 ユーザーズマニュアル
13
9033705-01
• The AC power connector is a standard three-pronged
connector that supports the power cord. Plug-in the
female connector of the provided power cord into this
socket, and the male side of the cord into a power
outlet. Supported input voltages range from 100 ~
240 VAC at 50 ~ 60 Hz.
female connector of the provided power cord into this
socket, and the male side of the cord into a power
outlet. Supported input voltages range from 100 ~
240 VAC at 50 ~ 60 Hz.
Side Panels
The right side panel of the Switch contains two system fans
(see the top part of the diagram below). The left side panel
contains heat vents.
(see the top part of the diagram below). The left side panel
contains heat vents.
Figure 1-3. Side panel views of the Switch
• The system fans are used to dissipate heat. The
sides of the system also provide heat vents to serve
the same purpose. Do not block these openings, and
leave at least 6 inches of space at the rear and sides
of the Switch for proper ventilation. Be reminded that
without proper heat dissipation and air circulation,
system components might overheat, which could lead
to system failure.
the same purpose. Do not block these openings, and
leave at least 6 inches of space at the rear and sides
of the Switch for proper ventilation. Be reminded that
without proper heat dissipation and air circulation,
system components might overheat, which could lead
to system failure.
LED Indicators
The LED indicators of the Switch include Power, Link/Act,
and RDP in use. The following shows the LED indicators for
the Switch along with an explanation of each indicator.
and RDP in use. The following shows the LED indicators for
the Switch along with an explanation of each indicator.