Enterasys Networks 6H3xx ユーザーガイド

To display the link status and current operating mode of each Ethernet port. This screen also 
provides access to the Ethernet Port Configuration screen, which allows configuration of the 
Ethernet port.

In normal operation, all front panel ports of the switch module automatically establish a link with 
the device at the other end of the segment without requiring user setup. However, the Ethernet 
Interface Configuration screen can be used to access the Ethernet Port Configuration screen to 
select a port and display its characteristics. The Ethernet Port Configuration screen is used to 
change the operating mode of the port and enable or disable the advertisement to another device. 
Refer to 

 for details.

Use the arrow keys to highlight the ETHERNET INTERFACE CONFIGURATION menu item 
on the Port Configuration Menu screen and press ENTER. The Ethernet Interface Configuration 
screen, 

, displays. 

Used to logically group interfaces together to permit aggregation of 
multiple links. This menu item appears when the Agg Mode field is set 
to “HUNTGROUP” in the General Configuration screen. Refer to the 
SmartTrunk User’s Guide for information about how to access and use 
the SmartTrunk screens.

Used to logically group interfaces together to create a greater 
bandwidth uplink according to the IEEE 802.3ad standard. This menu 
item appears when the Agg Mode field is set to “IEEE8023ad” in the 
General Configuration screen. Refer to the 

 for information 

about how to access and use the SmartTrunk screens.

Used to set a desired limit of received broadcast frames that are 
forwarded out other interfaces. For details, refer to