SMC Networks 100 ユーザーズマニュアル
A
BOUT
THE
T
IGER
S
WITCH
100
1-4
Status LEDs
The LEDs, which are located on the front panel for easy viewing,
are shown below and described in the following table.
are shown below and described in the following table.
Figure 1-4. Port and System LEDs
Port and System Status LEDs
LED
Condition
Status
Power
On
Switch is receiving power.
RPU
On
Redundant power is on, and the RPU is in
backup or active mode.
backup or active mode.
Off
Redundant power is off or has failed.
Mgmt
On
Agent is operational.
VF-45 Ports
Link
On
Port has established a valid network
connection.
connection.
Green
Valid 100 Mbps connection.
Flashing
Port has been partitioned due to an
abnormal network condition, or manually
disabled.
abnormal network condition, or manually
disabled.
Act*
Flashing
Traffic is passing through the port.
FDX*
On
Port is operating at full duplex.
Off
Port is operating at half duplex.
FC*
On
Flow control enabled.
* Use the Mode Select button to select the LED display mode.
1
Status
Activity
U