Avaya P332MF ユーザーズマニュアル
Chapter 6
CLI – Layer 2
134
Avaya P332MF User’s Guide
set radius authentication retry-time
Use the
set radius authentication retry-time
command to set the time
to wait before re-sending an access request.
The syntax for this command is:
set radius authentication retry time <time>
set radius authentication retry-number
Use the
set radius authentication retry-number
command to set the
number of times an access request is sent when there is no response.
The syntax for this command is:
set radius authentication retry number <number>
set radius authentication udp-port
Use the
set radius authentication udp-port
command to set the RFC
2138 approved UDP port number. Normally, the UDP port number should be set to
its default value of 1812. Some early implementations of the RADIUS server used
port number 1645.
its default value of 1812. Some early implementations of the RADIUS server used
port number 1645.
The syntax for this command is:
set radius authentication server udp-port <number>
time
Retry time in seconds
number
Retry number