Avaya P330-ML-ML ユーザーズマニュアル
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide
275
ip address
User level: privileged, supervisor.
Use the ip address command to assign an IP address and mask to an interface.
Use the ip address command to assign an IP address and mask to an interface.
The syntax for this command is:
ip address <ip-address> <mask> [<admin-state>]
Example:
To assign the IP address 192.168.22.33 with mask 255.255.255.0 to the interface
“marketing”:
To assign the IP address 192.168.22.33 with mask 255.255.255.0 to the interface
“marketing”:
ip admin-state
User level: privileged, supervisor.
Use the admin-state command to set the administrative state of an IP interface.
The default state is up.
Use the admin-state command to set the administrative state of an IP interface.
The default state is up.
The syntax for this command is:
ip admin-state <up/down>
Example:
ip address
The IP address assigned to the interface.
mask
Mask for the associated IP subnet
admin-state
The administration status – either Up or Down
Router-N(config-if:marketing)# ip address 192.168.22.33
255.255.255.0
Done!
up/down
Administrative state of the interface.
The choices are
• up (active) or
• down (inactive).
The choices are
• up (active) or
• down (inactive).
Router-N(config-if:marketing)# ip admin-state up