Avaya P330-ML-ML ユーザーズマニュアル
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
18
Avaya P330-ML Reference Guide
Example:
copy running-config startup-config
User level: supervisor
L This command applies to the P334T-ML only when it is in “Layer2”
L This command applies to the P334T-ML only when it is in “Layer2”
device mode.
Use the copy running-config startup-config command to copy the active
policy configuration to the startup configuration file in the NVRAM.
policy configuration to the startup configuration file in the NVRAM.
The syntax for this command is:
copy running-config startup-config
Example:
copy running-config tftp
User level: supervisor
L This command applies to the P334T-ML only when it is in “Layer2”
L This command applies to the P334T-ML only when it is in “Layer2”
device mode.
Use the copy running-config tftp command to upload the policy
configuration to a TFTP server.
configuration to a TFTP server.
The syntax for this command is:
copy running-config tftp
<filename> <ip>
P330-N# copy running-config scp c:\config\switch1.cfg 192.168.49.10 5
Username: 330user
Password:
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show upload status' command
********************************************************************
* If you are currently running the P330-ML Device Manager
application,*
* it is recommended to exit from it before performing configuration*
* download operations. *
********************************************************************
P330-N# copy running-config startup-config
filename
Destination file name in the tftp server (full path).