Avaya 882 ユーザーズマニュアル
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
8-1
8
Configuring Ports
Overview
The following information and procedures are provided in this chapter and
are common to both layer 2 and layer 3 module configuration:
are common to both layer 2 and layer 3 module configuration:
■
■
■
■
■
■
■
For more information about the CLI commands that are mentioned in this
chapter, see Command Reference Guide for the Avaya P580 and P882
Multiservice Switches, Software Version 6.1.
chapter, see Command Reference Guide for the Avaya P580 and P882
Multiservice Switches, Software Version 6.1.
Two Categories of Port Settings
The system has two categories of port settings:
■
Physical port settings — Allows you to set up rules that guide the
system’s physical layer interaction (for example, enable/disable,
speed, auto-negotiation).
system’s physical layer interaction (for example, enable/disable,
speed, auto-negotiation).
■
Switch port settings — Allows you to specify how the port
participates in switching (for example, VLAN mode, trunking).
participates in switching (for example, VLAN mode, trunking).
The following sections explain some of the Avaya P580 and P882
Multiservice switch features and how to configure the ports:
Multiservice switch features and how to configure the ports:
■
■
■
■