Avaya 882 ユーザーズマニュアル
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
2-1
2
Setting Up the Switch
Overview
The following information and procedures that are provided in this chapter
are common to both layer 2 and layer 3 module:
are common to both layer 2 and layer 3 module:
■
■
■
■
■
■
■
■
■
■
* Note: The last step in each procedure tells you to Click APPLY to
save the setup or changes that you made. This step saves the
setup or any changes to the running configuration only. The
startup configuration is not changed. Therefore, these and other
changes will be lost if the switch goes down or if you turn it off.
setup or any changes to the running configuration only. The
startup configuration is not changed. Therefore, these and other
changes will be lost if the switch goes down or if you turn it off.
To save any changes to the startup configuration, you must copy
the running configuration to the startup configuration. For
information on how to perform this task, see “
the running configuration to the startup configuration. For
information on how to perform this task, see “
” later in this chapter.
For more information about the CLI commands that are mentioned in this
chapter, see Command Reference Guide for the Avaya P580 and P882
Multiservice Switches, Software Version 6.1.
chapter, see Command Reference Guide for the Avaya P580 and P882
Multiservice Switches, Software Version 6.1.