Avaya 882 ユーザーズマニュアル
Document No. 10-300077, Issue 2
25-19
80-Series QoS
Setting a Physical Port to Use DiffServ
CLI Command
Use the set port use-diffserv command to set a port to classify bridged IP
traffic by its DiffServ code point (DSCP). The syntax for the command is:
traffic by its DiffServ code point (DSCP). The syntax for the command is:
(
configure)#
set port use-diffserv {{<mod-num> | <mod-swport-
range>} [..., {<mod-num> | <mod-swport-range>}] | all-ports} {on | off}
Example
To set ports 4 through 12 on the module in slot 6 to classify bridged IP
traffic by DSCP, enter:
traffic by DSCP, enter:
set port use-diffserv 6/4-12 on
Table 25-10. Keywords, Arguments, and Options
Keyword, Argument or
Option
Option
Definition
<mod-num>
The slot number of a module. If you specify
<mod-num>, all ports on the module are set
to use DiffServ.
<mod-num>, all ports on the module are set
to use DiffServ.
<mod-swport-range>
The slot number of a module, and, either a
port number, or a range of port numbers
having the format Px-Py. For example:
port number, or a range of port numbers
having the format Px-Py. For example:
• To specify port 1 on the module in slot
3, enter 3/1.
• To specify ports 1 through 5 on the
module in slot 3, enter 3/1-5.
If you specify <mod-swport-range>, the port
or range of ports on the module that you
specify is set to use DiffServ.
or range of ports on the module that you
specify is set to use DiffServ.
{all-ports}
All ports in the chassis. If you enter all-ports,
all ports in the chassis are set to use DiffServ.
all ports in the chassis are set to use DiffServ.
{on | off}
Indicates whether the switch uses the DSCP
to classify bridged IP traffic on the ports that
you specify:
to classify bridged IP traffic on the ports that
you specify:
• Enter on to classify traffic by DSCP.
• Enter off to ignore the DSCP.
The default setting is off.