Atlona AT-PRO2HD88M ユーザーズマニュアル

To set up the RS-232 hyperterminal (if not using 3rd party software) the first thing needed is to find 
the RS-232 communications port under the computer’s device manager. Once there right click the 
port and select properties. Under the properties menu select the port settings tab and update the 
menu to the matrix default: Bits Per Second: 115200, Data Bits: 8, Parity: None, Stop Bits: 1 and 
Flow Control: None.

To change the baud rate of the matrix or the receivers (i.e. AT-PRO2HDREC or AT-PRO21616M-RX) 
an RS-232 hyperterminal will be needed. Once the RS-232 hyperterminal is set up changing the baud 
rate will be done with a command line. The baud rate for the matrix is for matrix control and 
the output baud rate is for control of the RS-232 device in the zone being altered.
Note: Baud Rate must be only 2400, 4800, 9600, 19200, 38400, 57600, or 115200

AT-PRO2HD88M      

         Select function option 

    AT-PRO2HD88M 

 

     AT-PRO2HD88M

Select Input Number 

            

 

 

    FW Ver: 1.0.X  

 

     Console: 115200 8 None 1

----->

----->

----->

To view the current baud rate of the Matrix: select function, press 8, and then press 4.

To view the current baud rate of the Outputs: select function, press 8, and then press 5 (press 5 
repeatedly to cycle through each output).

AT-PRO2HD88M      

         Select function option 

    AT-PRO2HD88M 

 

     AT-PRO2HD88M

Select Input Number 

            

 

 

    FW Ver: 1.0.X  

 

     Port x: 9600 8 None 1

----->

----->

----->