HP (Hewlett-Packard) Q.11. (2510-24) ユーザーズマニュアル

ページ / 294
3-10
Web and MAC Authentication
Operating Rules and Notes
Operating Rules and Notes
You can configure one type of authentication on a port. That is, the 
following authentication types are mutually exclusive on a given 
port:
Web Authentication
MAC Authentication
802.1X
Order of Precedence for Port Access Management (highest to lowest):
MAC lockout
MAC lockdown or Port Security
Port-based Access Control (802.1X) or Web Authentication or MAC 
Authentication
N o t e   o n   P o r t  
A c c e s s  
M a n a g e m e n t
When configuring a port for Web or MAC Authentication, be sure that a higher 
precedent port access management feature is not enabled on the port. For 
example, be sure that Port Security is disabled on a port before configuring it 
for Web or MAC Authentication. If Port Security is enabled on the port this 
misconfiguration does not allow Web or MAC Authentication to occur.
VLANs: If your LAN does not use multiple VLANs, then you do not 
need to configure VLAN assignments in your RADIUS server or 
consider using either Authorized or Unauthorized VLANs. If your LAN 
does use multiple VLANs, then some of the following factors may 
apply to your use of Web-Auth and MAC-Auth.
Web-Auth and MAC-Auth operate only with port-based VLANs. Oper-
ation with protocol VLANs is not supported, and clients do not have 
access to protocol VLANs during Web-Auth and MAC-Auth sessions.
A port can belong to one, untagged VLAN during any client session. 
Where multiple authenticated clients may simultaneously use the 
same port, they must all be capable of operating on the same VLAN.
During an authenticated client session, the following hierarchy deter-
mines a port’s VLAN membership:
1.
If there is a RADIUS-assigned VLAN, then, for the duration of the 
client session, the port belongs to this VLAN and temporarily 
drops all other VLAN memberships.