HP (Hewlett-Packard) RPC-3A ユーザーズマニュアル
RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
41
NOTE: The outlet user sees only those outlets as assigned to him
by the admin user.
by the admin user.
From the RPC > prompt, enter one of the
following commands: ON n, OFF n,
REBOOT n, where “n” is the outlet number
you want to command. Entering an outlet
number of “0” sends the command to all
outlets.
following commands: ON n, OFF n,
REBOOT n, where “n” is the outlet number
you want to command. Entering an outlet
number of “0” sends the command to all
outlets.
Example:
To turn “On” Outlet 3, type ON 3 from the
RPC prompt (RPC >). The RPC responds
with:
RPC prompt (RPC >). The RPC responds
with:
Turn On Outlet 3 (Y/N)?
Responding “Y” for yes turns “On” Outlet 3.
Observe the status of Outlet 3 has changed
to On in the status menu:
Observe the status of Outlet 3 has changed
to On in the status menu:
Circuit Breaker : On
Selection
Outlet
Outlet
Power
Number
Name
Number
Status
1
OUTLET 1
1
Off
2
OUTLET 2
2
Off
3
OUTLET 3
3
Off
4
OUTLET 4
4
Off
5
OUTLET 5
5
Off
6
OUTLET 6
6
Off
7
OUTLET 7
7
Off
8
OUTLET 8
8
Off
RPC >
Likewise, typing ON 0 at the RPC > prompt
and responding “Y” for yes, turns “On” all
outlets. Typing OFF n at the RPC > prompt
turns off corresponding outlet(s).
and responding “Y” for yes, turns “On” all
outlets. Typing OFF n at the RPC > prompt
turns off corresponding outlet(s).
The REBOOT n command will reboot or
reset equipment attached to corresponding
reset equipment attached to corresponding