HP (Hewlett-Packard) A3100-16-PoE v2 EI ユーザーズマニュアル

User interface 

authentication 

mode 

User privilege level 

switch 

authentication 

mode 

Information input for the 

first authentication mode 

Information input after the 

authentication mode changes 

local 

Local user privilege level 
switch password 

— 

local scheme 

Local user privilege level 
switch password 

Password for privilege level 
switch (configured on the AAA 

server). The system uses the 

username used for logging in as 
the privilege level switch 

username. 

scheme 

Password for privilege level 
switch (configured on the 

AAA server). The system uses 

the username used for 

logging in as the privilege 
level switch username. 

— 

scheme 

scheme local 

Password for privilege level 

switch (configured on the 
AAA server). The system uses 

the username used for 

logging in as the privilege 

level switch username. 

Local user privilege level switch 

password 

 

 

CAUTION: 
• 

When the authentication mode is set to local, configure the local password before switching to a higher
user privilege level. 

• 

When the authentication mode is set to scheme, configure AAA related parameters before switching to
a higher user privilege level. 

• 

The privilege level switch fails after three consecutive unsuccessful password attempts. 

• 

For more information about user interface authentication, see the chapter “Logging in to the switch 
configuration.” 

 

Modifying the level of a command  

All the commands in a view default to different levels. The administrator can change the default level of 

a command to a different level as needed. 
Follow these steps to modify the command level: 

To do… 

Use the command… 

Remarks 

Enter system view 

system-view 

— 

Configure the command level in a 
specified view 

command-privilege level level view 
view command 

Required 
See 

 for the default settings. 

 

19