HP (Hewlett-Packard) A3100-16-PoE v2 EI ユーザーズマニュアル
Figure 11 Configuration page
Configuring common settings for console login (optional)
Follow these steps to configure common settings for console port login
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable display of copyright
information
information
copyright-info enable
Optional
Enabled by default.
Enabled by default.
Enter AUX user interface view
user-interface aux first-number
[ last-number ]
[ last-number ]
—
Configure the
baud rate
baud rate
speed speed-value
Optional
By default, the transmission rate is
9600 bps.
Transmission rate is the number of
bits that the device transmits to the
By default, the transmission rate is
9600 bps.
Transmission rate is the number of
bits that the device transmits to the
terminal per second.
Configure the
parity check mode parity { even | none | odd }
parity check mode parity { even | none | odd }
Optional
none by default.
none by default.
Configure
AUX user
AUX user
interface
view
properties
Configure the stop
bits
bits
stopbits { 1 | 1.5 | 2 }
Optional
By default, the stop bits of the
By default, the stop bits of the
console port is 1.
Stop bits are the last bits transmitted
Stop bits are the last bits transmitted
in data transmission to
unequivocally indicate the end of a
unequivocally indicate the end of a
character. The more the bits are, the
slower the transmission is.
34