HP (Hewlett-Packard) A3100-8 DC EI ユーザーズマニュアル

 

Configuring scheme authentication for console login 

Configuration prerequisites 

You have logged in to the device. 
By default, you can log in to the device through the console port without authentication and have user 

privilege level 3 after login. For information about logging in to the device with the default configuration, 

see “

.” 

Configuration procedure 

Follow these steps to configure scheme authentication for console login: 

To do… 

Use the command… 

Remarks 

Enter system view 

system-view 

— 

Enter AUX user interface view 

user-interface aux first-number 
[ last-number ] 

— 

Specify the scheme 
authentication mode 

authentication-mode scheme 

Required 
Whether local, RADIUS, or 
HWTACACS authentication is 

adopted depends on the configured 

AAA scheme. 
By default, users that log in through 

the console port are not 
authenticated. 

Enable command authorization  command authorization 

Optional 

• 

By default, command 
authorization is not enabled. 

• 

By default, the command level 
depends on the user privilege 
level. A user is authorized a 

command level not higher than 

the user privilege level. With 

command authorization 
enabled, the command level for 

a login user is determined by 

both the user privilege level and 

AAA authorization. If a user 
executes a command of the 

corresponding command level, 

the authorization server checks 

whether the command is 
authorized. If yes, the command 

can be executed. 

• 

Before enabling command 
authorization, configure the AAA 

authorization server. After you 

enable command authorization, 

only commands authorized by 
the AAA authorization server can 

be executed. 

31