HP (Hewlett-Packard) 445946-001 ユーザーズマニュアル

Accessing the switch

SNMPv2 trap host configuration

The SNMPv2 trap host configuration is similar to the SNMPv1 trap host configuration. Wherever you
specify the model, specify

snmpv2

instead of

snmpv1

c/sys/ssnmp/snmpv3/usm 10 (Configure user named “v2trap”)

name "v2trap"

/c/sys/ssnmp/snmpv3/access 10 (Define access group to view SNMPv2 traps)

name "v2trap"

model snmpv2

nview "iso"

/c/sys/ssnmp/snmpv3/group 10 (Assign user to the access group)

model snmpv2

uname v2trap

gname v2trap

/c/sys/ssnmp/snmpv3/notify 10 (Assign user to the notify table)

name v2trap

tag v2trap

/c/sys/ssnmp/snmpv3/taddr 10 (Define an IP address to send traps)

name v2trap

addr 47.81.25.66

taglist v2trap

pname v2param

/c/sys/ssnmp/snmpv3/tparam 10 (Specify SNMPv2 traps to send)

name v2param

mpmodel snmpv2c

uname v2trap

model snmpv2

/c/sys/ssnmp/snmpv3/comm 10 (Define the community string)

index v2trap

name public

uname v2trap

SNMPv3 trap host configuration

To configure a user for SNMPv3 traps, you can choose to send the traps with both privacy and

authentication, with authentication only, or without privacy or authentication. Use the following commands
to configure the access table:

/c/sys/ssnmp/snmpv3/access <x>/level

/c/sys/ssnmp/snmpv3/tparam <x>

Configure the user in the user table to match the configuration of the access table.
It is not necessary to configure the community table for SNMPv3 traps because the community string is not

used by SNMPv3.