HP (Hewlett-Packard) 445946-001 ユーザーズマニュアル

 

 

 

Accessing the switch

 

 

 

  

 

32

 

Configuring the SCP administrator password 

To configure the 

scpadmin

 (SCP administrator) password, first connect to the switch via the RS-232 

management console. For security reasons, the 

scpadmin

 password can be configured only when 

connected directly to the switch console. 
To configure the password, enter the following CLI command. At factory default settings, the current SCP 
administrator password is 

admin

. 

>> # /cfg/sys/sshd/scpadm 

Changing SCP-only Administrator password; validation required. . . 

Enter current administrator password: <password> 

Enter new SCP-only administrator password: <new password> 

Re-enter new SCP-only administrator password: <new password> 

New SCP-only administrator password accepted. 

 

 

 The SCP-only administrator password must be different from the regular 

administrator password.  

Using SSH and SCP client commands 

The following shows the format for using some client commands. The examples below use 
205.178.15.157 as the IP address of a sample switch. 

Logging in to the switch 

Enter the following command to log in to the switch: 

ssh <user>@<switch IP address>  

For example: 

>> # ssh admin@205.178.15.157 

Downloading configuration from the switch using SCP 

Enter the following command to download the switch configuration using SCP. You will be prompted for a 

password:  

scp <user>@<switch IP address>:getcfg <local filename> 

For example: 

>> # scp scpadmin@205.178.15.157:getcfg ad4.cfg 

The switch prompts you for the 

scpadmin

 password.  

Uploading configuration to the switch using SCP 

Enter the following command to upload configuration to the switch. You will be prompted for a password. 

scp <local filename> <user>@<switch IP address>:putcfg 

For example: 

>> # scp ad4.cfg admin@205.178.15.157:putcfg