HP (Hewlett-Packard) 2650 (J4899A/B) ユーザーズマニュアル

7-13

Configuring the Switch for SSL Operation

Generate a Self-Signed Host Certificate with the Web browser 
interface

You can configure SSL from the web browser interface. For more information 
on how to access the web browser interface, refer to the chapter titled “Using 
the Web Browser Interface” in the Management and Configuration Guide for 
your switch.

To generate a self signed host certificate from the web browser interface:

i.

Select the

 Security tab then the 

 button. The SSL configuration 

screen is divided into two halves. The left half is used for creating 
a new certificate key pair and (self-signed / CA-signed) certificate. 
The right half displays information on the currently installed 
certificate.

ii.

Select the 

Create Certificate/Certificate Request radio button. 

iii. Select 

Self-Signed in the Certificate Type drop-down list.

iv. Select the 

RSA Key Size desired. If you want to re-use the current 

certificate key, select 

Current from this list.

v.

Fill in the remaining certificate arguments. (Refer to “Comments 
on Certificate Fields.” on page 7-11.)

vi. Click on the 

  button to generate new certificate and 

key, if selected.

When generating a self-signed host certificate, if no key is present and the 
current option is selected in the RSA key size box and error will be generated. 
New key generation can take up to two minutes if the key queue is empty.